drop method

英 [drɒp ˈmeθəd] 美 [drɑːp ˈmeθəd]

点滴法;电压降落法;垂滴法;滴入法

化学



双语例句

  1. The sessile drop method and digital image analytical method were combined to determine the interfacial tension of system with larger interfacial tension.
    采用躺滴法结合图像处理来测量界面张力较大体系的界面张力。
  2. Surface Tension and Density of Molten Borosilicate Glass Measured by Sessile Drop Method
    低膨胀硼硅酸盐玻璃熔体密度和表面张力测量
  3. Relations of the Cycle Function Method, the Matrix Method and the Equivalent Enthalpy Drop Method
    循环函数法、矩阵法与等效焓降法之间的联系
  4. So the equivalent enthalpy drop method is suggested to calculate the change of electric power with back pressure changing in engineering.
    因此,建议工程上可以采用等效热降法计算背压变化时汽轮发电机组电功率的变化量。
  5. Relation of two equivalent entropy drop method is conducted, and doing work efficiency of reheater has different choices.
    证明了两种等效热降法的重要关系,指出再热器吸热的作功效率有不同的选择方法。
  6. Detection of Notch Crack Initiation and Propagation by DC Potential Drop Method
    缺口裂纹起裂和扩展检测的直流电位法
  7. Research on Thermal Economic Diagnosis Method Based on the Improved Equivalent Enthalpy Drop Method for Thermal System of Steam Turbine
    基于改进等效热降法的汽轮机热力系统热经济性诊断方法研究
  8. In the present research, surface tension and density of borosilicate melts were measured and compared to that of Na-Ca containing glass melt using sessile drop method.
    采用静滴法测量并对比典型低膨胀硼硅酸盐玻璃和普通钠钙硅玻璃的熔体密度和表面张力。
  9. Water contact angles were measured by sessile drop method.
    采用躺滴法测量薄膜与双蒸水之间的接触角。
  10. Water transport properties of the double-face fabrics are tested by drop method and strip method.
    通过滴液法和垂直芯吸法对双罗纹织物进行了液态水传导性能的研究。
  11. Method: The trace drop method was used.
    方法:微量点滴法。方法采用微量点滴法。
  12. First, we introduce the trapezoid drop method based on cumulative error, and give a study way of adaptation.
    我们首先简单介绍基于累积误差的梯形下降法,在此基础上,给出了一种自适应学习速率的调整方案。
  13. Through the thermal tests, by using enthalpy drop method and calculation expressions, the paper carried out the quantitative calculation of shaft gland steam leakage of high back pressure units for the Heat and Power Facilities Department of Baling company and compared with the designed value.
    文章通过热力试验,采用了焓降法和计算式对巴陵石化有限责任公司热电事业部高背压机组的轴封漏汽量进行了定量计算,并与设计值进行了比较。
  14. Application& Development of High-temperature Sessile Drop Method and Equipment
    高温座滴法实验技术及装置的应用和发展
  15. The error of measurement of interracial tension by the sessile drop method is dis-cussed in this paper.
    讨论了座滴法测量界面张力的误差。
  16. The result shows that the error of thermodynamics method and steam turbine theory method are very big except the equivalent enthalpy drop method.
    比较结果表明,除等效热降法外,热力学方法和汽轮机原理方法的计算误差都很大。
  17. Comparison on Algorithms Based on Equivalent Enthalpy Drop Method and Their Combined Application
    等效焓降扩展算法的比较和联合应用
  18. The Consistency of the Enthalpy Drop Method as Used in Calculation of Integral Thermal
    等效焓降法在热力系统整体计算中与常规热平衡方法一致性研究
  19. The Mathematical Theory of the Equivalent Heat Drop Method
    等效热降法的数学理论基础研究
  20. The influence of these parameters on the effect of cementing displacement is investigated indirectly by using the pressure drop method, and the variation pattern of the displacement effect with these parameters is obtained from the result of the simulation test.
    运用压降分析法间接探讨了这些参数对定向井注水泥顶替效果的影响。由模拟试验结果得出了定向并注水泥顶替效果随这些参数变化的规律。
  21. Compared with the equivalent enthalpy drop method, these algorithms are more effective in dealing with the idiographic problems.
    与等效焓降法相比,它们在具体问题和要求上更有针对性。
  22. The basic principle of measuring spreading coefficients by the large sessile drop method has been introduced.
    介绍了液饼高度法测定铺展系数的基本原理。
  23. While oil lubrication design should involve the selection of oil viscosity, oil drop method and structure.
    油润滑设计应考虑油粘度选取,滴油润滑方式和结构型式等原则。
  24. The wetting angles of various metals and their alloys were determined by high temperature sessile drop method.
    采用高温座滴法测定了一系列金属及合金在TiO上的接触角。
  25. The surface properties of hydroxy-terminated polystyrenes were investigated by Wilhelmy plate technique and sessile drop method.
    利用Wilhelmy片技术和躺滴法研究了端羟基化聚苯乙烯的表面性质。
  26. The surface tension of Cu-Sn alloy was determined by the sessile drop method.
    用卧滴法测定了纯度均为99.999%的Cu,Sn及其合金的表面张力,Cu和Sn表面张力的温度系数分别为-0.38和-0.071×10~(-3)N·m~(-1)·K~(-1)。
  27. With the analysis to the different forms of pressure drop method, the characteristics and differences of each ones about measurement are obtained.
    通过对压降法不同形式的分析,找到了各自在测量上的特点及相互间的差别。
  28. It calculates single well dynamic geological reserves by pressure drop method and cumulative production method, analyses the extent of the use of reserves and horizontal well recoverable reserves.
    利用压降法和产量累计法计算单井控制动态地质储量,分析储量动用程度和水平气井的可采储量。
  29. The sessile drop method is simple and easy to operate compared to other methods.
    与其他方法相比较,躺滴法具有简单易行的优点。
  30. The operation condition of the heating unit is formulated by equivalent drop method which in analysis of the heating system and heating programs problems.
    探讨了供热机组热力曲线模型计算方法,介绍了等效热降法的基本原理,利用等效热降法制定供热机组的工况图,分析供热系统变化和供热方案等方面的技术问题。